Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all? EAS Amber light lit? Fault code C1A20, C1A1364, C50, or C1A20-64 showing? One or more of these errors: “Suspension error only normal height available”
“Suspension fault; pressure not rising quick enough” Or “Pressure does not decrease when venting gallery”?
THE CAUSE
The piston seals within your vehicles EAS air compressor are likely worn, filters saturated and the dryer end cap failing reducing output significantly.
The likely cause of the faults noted above will be a leak on the compressor, worn piston seals or saturated filters. This results in reduction of compressor output and triggers vehicle faults as well as extending the time taken to lift the vehicle.
VEHICLES AFFECTED
Discovery MK 3 (LR3) 2005-2009
Discovery MK 4 (LR4) 2010-2012
Range Rover Sport 2005-2013
Range Rover L322 2006-2009
Our kit will only repair the original Hitachi compressor illustrated to the left. If the compressor has been changed in vehicles life to a different compressor our kit will not repair this. It is worthwhile checking the compressor is as illustrated to the left (see instructions on how to access compressor)
Associated part numbers, our kit will only repair Hitachi compressor.
RQG000017 RQG000018 RQG000019 RQL500040 RQG500060 RQG500061 RQG500062 RQG500070 RQG500071 RQG500072 RQG500080 RQG500090 RYG500160 LR023964 LR010376 LR045251 LR044360 LR01530 LR015303 UUB504700 VUB504700
THE SOLUTION
Fit our improved design dryer end cap, piston seal, glide seal and filter kit and restore your compressor to full health.
Our complete kit includes all needed to restore your compressor to full health. Our kit includes a new improved design glide ring and piston ring, constructed to the finest of tolerances from improved materials to restore full output. Also included is two custom tools to allow easy replacement of these seals.
Full filter replacement kit to allow you to replace all filters and drying beads within the drier unit, the original filters saturate quickly and drastically effect output, our improved replacements will solve this problem.
This kit includes a new improved design dyer end cap, re-designed and engineered to not fail again. A simple straight swap for the old dryer end cap. Made from billet aluminium with a Viton seal to provide a perfect long lasting seal with the dryer canister.
Improved metal collets and materials, designed to never fail again.
X2 air collet Viton o-rings, X2 piston liner Viton seals, X1 high temp Piston liner gasket no need to reuse the poor quality originals!
X1 dryer to compressor Viton O-ring seal, X1 metal filter Viton seal, X1 dryer end cap Viton seal. Replace all dryer seals with our improved material Viton seals to cure present and prevent future leaks.
FULL INSTRUCTIONS INCLUDED
Any questions please contact us, we are here to help!
1 year warranty with all our products.
Experts in automotive solutions;
10 years experience in manufacturing bespoke parts.
VAT invoice included with every item, trade discounts offered.
