VAUXHALL OPEL HOLDEN SIGNUM VECTRA ROOF AERIAL BASE RUBBER GASKET SEAL BEE STING PART NUMBER: X8R0064
PRODUCT DESCRIPTION
Our repair kit in this listing addresses the common failure of the aerial base seal. Our components described herein with the assistance of our supportive instruction media will allow you to replace just the faulty seal without having to replace the entire unit. This is an extremely common fault corrected by our repair kit.
SYMPTOMS OF FAULT
It is easy to diagnose this fault by inspecting the base of the aerial, it is often evident visually if the seal is failing. It is not totally uncommon for the outside of the seal to appear intact but for the seal to be failing to prevent water ingress, this will be evident by water in the vehicle cabin around the interior light or headlining.
THE CAUSE
THE OEM SEAL ON THE BASE OF THE AERIAL DETERIORATES AND FAILS.
The OEM seal on the base of the aerial of most vehicles is made from a poor quality rubber, this deteriorates over time causing the seal / gasket to crack, discolour and perish, ruining the aesthetics of the part and the sealing function. Often these can fail to the extent that the seal is lost or only semi intact. Failure of the sealing function of the base gasket can also in some cases lead to leaks within the cabin of the vehicle.
It is extremely rare that the unit cannot be overhauled to restore function.
THE SOLUTION
INSTALL OUR REPLACEMENT BASE GASKET SEAL AND RESTORE THE APPEARANCE AND SEALING FUNCTION OF THE AERIAL BASE GASKET.
Our replacement seal can be fitted easily to restore the appearance of your aerial. Also stopping any water ingress in to the vehicle cabin. An ideal replacement to your cracked, worn, discoloured or generally aged antenna base gasket seal. Our item allows you to replace just the seal that fails without the need to replace the whole antenna base at vast expense from the vehicle manufacturer, saving money and time. Other seals on eBay will have a larger footprint so cannot be fitted in situe so the whole aerial has to be removed which is a tricky job. Our improved design seal is specifically designed to be installed from outside the vehicle, saving the labour of removing the interior trim to removing the complete aerial base to replace the seal. Our seal can be replaced in situe making the job far easier. Please check out our video showing this simple process. Our seal can be flexed in to position to seal the base of the gasket between the aerial base and the vehicles roof providing a perfect seal.
VEHICLES AFFECTED
OUR SEAL WILL FIT MANY VEHICLES, IT IS IMPOSSIBLE FOR US TO LIST FOR ALL VEHICLES THAT OUR ITEM WILL FIT OR TO TEST ON ALL VEHICLES.
THIS ITEM IS A UNIVERSAL ITEM AND WILL FIT MANY VEHICLES. THE GASKET IS OVAL IN SHAPE; WITH EXTERNAL DIMENSIONS OF 60MM BY 43MM APPROXIMATELY. INTERNALLY 50 MM BY 40 MM. THE RUBBER IS FLEXIBLE AND STRETCHABLE SO SOME VARIATION/TOLERANCE IS POSSIBLE. PLEASE MEASURE YOUR EXISTING BASE BEFORE ORDERING TO ENSURE SUITABILITY.
YOU WILL RECEIVE
This kit includes:
1X Replacement high quality seal.
